Air Power Engine Car Kit Instructions

This kit contains everything you need to build your own air power engine car. Follow these instructions carefully to ensure a successful build.

Materials

• Air power engine car kit
• Phillips head screwdriver
• Scissors
• Ruler or measuring tape
• Pencil

Instructions

Step 1: Assemble the chassis

1. Lay out the chassis parts on a flat surface.
2. Align the two side panels with the bottom panel, and insert the tabs into the slots.
3. Secure the side panels to the bottom panel using the screws provided.
4. Attach the front and rear bumpers to the chassis using the screws provided.

Step 2: Install the engine

1. Place the engine on the chassis, aligning the mounting holes with the holes in the chassis.
2. Secure the engine to the chassis using the screws provided.

Step 3: Install the wheels

1. Insert the axles into the holes in the wheels.
2. Place the wheels on the chassis, aligning the axles with the holes in the chassis.
3. Secure the wheels to the chassis using the screws provided.

Step 4: Install the air tank

1. Place the air tank on the chassis, aligning the mounting holes with the holes in the chassis.
2. Secure the air tank to the chassis using the screws provided.

Step 5: Install the air pump

1. Place the air pump on the chassis, aligning the mounting holes with the holes in the chassis.
2. Secure the air pump to the chassis using the screws provided.

Step 6: Connect the air lines

1. Connect the air line from the air pump to the air tank.
2. Connect the air line from the air tank to the engine.

Step 7: Test the car

1. Place the car on a flat surface.
2. Turn on the air pump.
3. The car should start moving forward.

Troubleshooting

If your car is not working properly, check the following:

• Make sure that all of the parts are assembled correctly.
• Make sure that the air lines are connected properly.
• Make sure that the air pump is working properly.
• Make sure that the engine is working properly.

Tips

• Use a ruler or measuring tape to ensure that the parts are assembled correctly.
• Be careful not to overtighten the screws.
• Test the car on a flat surface before taking it outside.
• Have fun!